Process
Seven steps from CAD to finished mold.
Every project follows the same path, so you always know what happens next, what you'll receive and when it's your turn to decide.
-
Project Intake
Tell us about your part through a short form: geometry, materials, tools and constraints.
OutputA clear brief we both agree on.
-
Feasibility Audit Free
We review your geometry and flag risks before you spend anything: manufacturability, lamination and demolding.
OutputA risk report within 48 hours.
-
FEA & Layup Design Optional
We validate performance with structural analysis and define the ply schedule.
OutputAnalysis report and ply schedule.
-
Optimization & Mold Design
We suggest modifications and set the technical direction, then design the mold around your process.
OutputOptimized geometry and mold CAD.
-
Review & Approval Your sign-off
We go through a pre-delivery checklist together. You approve the design before any manufacturing starts, and changes are cheap because nothing has been built yet.
OutputYour signed-off design.
-
Manufacturing
We build your mold and jigs to the approved design.
OutputTooling, with inspection photos before shipping.
-
Delivery & Priority Support
You receive your tooling and files, with guidance and chat assistance while you start making parts.
OutputMold, jigs, files and ongoing support.
Flexible entry points
Start at the step you need.
Every project starts with intake and the free feasibility audit. After that, you only pay for the steps your part needs.
Have a concept?
Start with FEA & Layup to make sure the part performs, then move to mold design.
FEA & Layup DesignHave a validated part?
Skip straight to mold design, starting with a free geometry review.
Mold DesignHave a mold design?
We check it, build it and ship it, with inspection photos before it leaves.
ManufacturingStep 01 starts here
Send us your CAD. Get a risk report in 48 hours. Free.
No cost, no obligation. Your files stay confidential.